Industrial RFID TAGs

INDUSTRIAL 1 mm x 6 mm Robust RFID ON METAL TAG HF

6 mm x 1 mm Robust RFID ON METAL TAG HF

The 6 mm x 1 mm robust RFID ON METAL TAG HF was developed for harsh environment RFID applications and is used by system integrators and end customers where equipment with metal surface should be identified by using HF RFID.

14 mm Adhesive Robust WET LABEL TAG NFC / HF

14 mm Adhesive Robust WET LABEL TAG NFC / HF

The 14 mm adhesive label TAG has comparable to flip chip mounted label an optimized mechanical protection. The copper etched, golden coated coil gives a good reading performance. The dry label is coated and makes the adhesive label suitable for outside or in wet environment applications. It can be used for asset management (high value brand consumer goods identification (garment, leather goods, parfum etc.) for logistics in the supply chain and anti-counterfeilting or maintenance applications of electronic devices, among others.

INDUSTRIAL CABLE TIE RFID TAG 27x20 mm LF or HF / NFC or UHF

Cable Tie RFID TAG yellow

The INDUSTRIAL RFID CABLE TIE TAG 27x20 mm is available as LF, HF, NFC or UHF version and is used by system integrators and industrial end users to identify devices, machines and equipment by easy mounting method. The INDUSTRIAL RFID CABLE TIE TAG LF, HF, NFC, UHF can be used in metal and nonmetal environment.

INDUSTRIAL 50 mm x 1 mm Laminated DISC EPOXY RFID TAG LF or HF, NFC

DISC EPOXY 50 x 1 mm

The 50 mm Laminated DISC EPOXY RFID TAG is available as LF 125 kHz /134 kHz, HF 13,56 MHz and as NFC version as well. By using the centre mounting hole the transponder can be permanently affixed at the equipment (which has to be identified) by means of screw or rivet. Suitable stationary and mobile industrial LF, or HF RFID readers are in the TECTUS RFID product portfolio.

INDUSTRIAL 10 mm x 2 mm Rugged RFID TAG HF

10 mm x 2 mm Rugged RFID TAG HF

The 10 mm x 2 mm robust RFID TAG HF was developed for harsh environment RFID applications and is used by system integrators and end customers where equipment should be identified by using HF RFID

INDUSTRIAL 50 x 7,8 mm Rugged Long Range UHF RFID TAG

INDUSTRIAL 50 x 7,8 mm Rugged Long Range UHF RFID TAG

The 50 x 8 mm Rugged Long Range UHF RFID TAG is used by system integrators and endusers by working in industrial areas to identify containers, pallets and other equipment with a read range of up to 7 m. The robust UHF RFID TAG can be affixed by screws or rivets. To read the UHF RFID TAG with stationary and mobile UHF RFID readers and antennas are available (see RFID readers section).

INDUSTRIAL 16 mm x 5 mm TUBE RFID TAG LF, HF, NFC

INDUSTRIAL 16 mm x 5 mm TUBE RFID TAG LF, HF, NFC

The TUBE RFID TAG is used in applications where an RFID TAG shoud be integrated into all kind of materials (including horizontally mounted in blind holes of metal, valid for the LF version only).

INDUSTRIAL 11 mm x 11 mm MINI NFC LABEL

11 mm x 11 mm MINI NFC STICKER

The MINI NFC Label is used by system integrators and endusers to mark and identify devices and equipment. The NFC Label is fully compatible to NFC Forum™ Type 2 and ISO14443 standard and can be read and programmed with NFC capable devices, like NFC smart phones, tablet-PCs and industrial handheld PDAs and rugged NFC phones.

INDUSTRIAL 2,5 mm x 2,5 mm x 1 mm Printed Circuit Board PCB-UHF-Tag

2,5 mm x 2,5 mm x 1 mm Printed Circuit Board PCB-UHF-Tag

Benefit of the very small 2,5 mm x 2,5 mm x 1 mm Printed Circuit Board PCB-UHF-Tag is the small shape which allows to mark printed circuit boards on small area. When mounted on or near conductors (metal) a coupling and booster effect can be achieved with the possibility to read the very small UHF tag from a distance typically about 300 mm.

INDUSTRIAL 54 mm TEC PU ON METAL RFID TAG LF, HF

54 mm TEC PU ON METAL RFID TAG LF, HF

The robust 54 mm TEC PU ON METAL RFID TAG is available as 125 kHz /134 kHz and HF 13,56 MHz version. By using the centre mounting hole the transponder can be permanently affixed at the object which has to be identified by means of screw or rivet. As well the mounting hole provides the possibility to use a cable tie or metal steel wire to mount the tag on valves or machine equipment in rugged industrial area environment. Suitable stationary and portable LF  and portable HF RFID readers are available.

Pages